MTK 65XX Platform Modifications

1. MTK DA VCOM USB Drivers: http://ge.tt/8sELSyg?c
--------------------------------------------------------------------------------------------------------
2. ADB Drivers: http://ge.tt/6efqqyg/v/3?c
--------------------------------------------------------------------------------------------------------
2(a) Apdetan terakhir ADB drivers: http://ge.tt/6NcvJbh/v/0?c
--------------------------------------------------------------------------------------------------------
3. SP Flash Tool V3. Untuk MT6575, MT6577, MT6589
(3 edisi terakhir, bisa pake yg mana aja): http://ge.tt/5Edn9gh?c

3(a) SP Flash Tool V2. Untuk MT6573 aja: http://ge.tt/5HhqgWj/v/0?c
--------------------------------------------------------------------------------------------------------
4. MTKdroidTools http://ge.tt/8FOYWVj/v/0?c

I. MTK FLASH TOOL (DA VCOM) DRIVER installation
1. Dowload MTK FlashTool driver (A.1)
2. Unpack dan run install_driver.exe atau installdrv64.exe (tergantung sistem yg anda pake)
-----------------------------------------------------------------------------------------------------------------------------------------------------
II. ADB Drivers installation
1. Download ADB driver installer (A.2)
2. Run UniversalAdbDriverSetup6.msi
-----------------------------------------------------------------------------------------------------------------------------------------------------
III. Meng-Update ADB driver (usang)

Win 8 / 7 / XP
1. Download and unpack ADB Drivers yang terupdate (A.2(a))
2. Nyalain device/phone trus disambungin ke PC.
3. Buka PC Device Manager.
4. Cari dan expand Android Phone.
5. Klik kanan di tampilan Android Composite ADB dan pilih Update Driver. Hardware Update Wizard bakalan kebuka.
6. Pilih "Install" trus Klik "Next".
7. Pilih "Search for the best driver in these locations"; un-check "Search removable media"; and check "Include this location" di dalam search.
8. Klik Browse dan temukan USB driver didalam unpacked Driver folder

Win Vista:
1. Download dan unpack Updated ADB Drivers (A.2(a))
2. Nyalain device/phone trus disambungin ke PC.
2. Buka PC Device Manager.
3. Cari dan expand ADB Interface.
4. Klik kanan di tampilan HTC Dream Composite ADB dan pilih "Update Driver Software". Hardware Update Wizard bakalan kebuka.
5. Ketika Vista mulai mengupdate driver, sebuah tampilan akan menanyakan bagaimana anda ingin mencari driver software. Pilih Browse my computer for driver software.
6. Pilih Browse dan temukan USB driver dalam unpacked Driver folder
7. Klik Next. Kemungkinan Vista nanya untuk konfirmasi privilege elevation yang dibutuhkan untuk install driver. Dikonfirm aja.
Ketika Vista nanyain buat install Google ADB Interface device, Klik "Install to upgrade the driver"

IV. Win 8 x64 Driver Installation.
Untuk Win 8 x64 ada pendekatan spesifik buat install drivers

1. Windows Key + R
2. Enter shutdown.exe /r /o /f /t 00
3. Klik tombol "OK"
4. System akan restart ke tampilan "Choose an option"
5. Pilih "Troubleshoot" dari tampilan "Choose an option"
6. Pilih "Advanced options" dari tampilan "Troubleshoot"
7. Pilih "Windows Startup Settings" dari tampilan "Advanced options"
8. Klik tombol "Restart"
9. System akan restart ke tampilan "Advanced Boot Options"
10. Pilih "Disable Driver Signature Enforcement"
11. Ketika system udah start, install Drivers sesuai/mengikuti para I & II, III

Kalo anda punya sistem baru dengan Win 8 pre-installed, kemungkinan Secure Boot dalam BIOS di enabled.

Langkah2 di atas, kemungkinan gak akan bisa bekerja kecuali Secure Boot dalam BIOS udah di disable sebelum melakukan langkah2 ini

NOTE 1: Jika anda memakai SP Flash Tool dan tidak yakin apakah ROM nya bisa digunakan di HH anda JANGAN mencentang PRELOADER & DSP_BL karena bisa mengakibatkan HH anda brick dan bisa berlanjut ke hardware recovery.

NOTE 2: Apabila tidak dibutuhkan, jangan menggunakan fungsi Format di Flash Tool karena bisa menghapus NAND Flash secara total. Gunakan fungsi ini hanya sebagai solusi "pilihan/kesempatan terakhir".

I. Flashing dengan SP Flash Tool

A. Complete ROM:
 Download & Install driver MTK DA VCOM(A.1, B.I)
Download dan unpack SP Flash Tool (A.3)
NOTE: Jangan menyambungkan HH ke PC sebelum langkah 7.
------------------------------------------------------------------------------------------

1. Buka SP Flash Tool – dobel klik pada Flash_tool.exe pada folder Flash tool
2. Klik tombol Scatter-loading dan arahkan ke folder ROM MT65XX_Android_scatter_emmc.txt (XX bisa berarti 73, 75, 77, 89 tergantung ROM apa yang anda miliki).

3. Tekan Firmware -> upgrade atau Download (upgrade Firmware mengharuskan semua pilihan untuk dicentang, fungsi Download memberi kesempatan untuk nge-flash ROM secara sebagian)
4. Matikan HH
5. Lepas Batere dari HH
6. Pasang kembali Batere ke HH
7. Sambungkan HH ke PC via kabel USB
8. PC akan mendeteksi HH, meng-install driver dan memulai prosedur flashing. Pertama-tama Progress-Bar akan berwarna Merah, lalu Ungu, Kuning dan terakhir Lingkaran Hijau akan muncul yang menandakan bahwa proses flashing telah selesai
 

9. Cabut kabel dari PC dan Nyalakan HH anda.


B. Partitial Flashing:
------------------------------------------------------------------------------------------
Download & Install driver MTK DA VCOM(A.1, B.I)
Download dan unpack SP Flash Tool (A.3)
NOTE: Jangan menyambungkan HH ke PC sebelum langkah 9.
------------------------------------------------------------------------------------------
1. Buka SP Flash Tool – dobel klik pada Flash_tool.exe di folder Flash tool
2. Klik tombol Scatter-loading dan arahkan ke MT65XX_Android_scatter_emmc.txt (XX bisa berarti 73, 75, 77, 89 tergantung ROM apa yang anda miliki).
3. Centang hanya pada partition yang diinginkan saja, pilihan lainnya tidak boleh dicentang (kotak pilahnnya harus dikosongkan (contoh di bawah adalah untuk flashing partisi RECOVERY)
 

4. Tekan Download (F9)
5. Tanda peringatan (warning) akan muncul karena tidak semua partisi dipilih/dicentang. Tekan Yes


6. Matikan HH
7. Lepas Batere dari HH
8. Pasang kembali Batere ke HH
9. Sambungkan HH ke PC via kabel USB
10. PC akan mendeteksi HH, meng-install driver dan memulai prosedur flashing. Pertama-tama Progress-Bar akan berwarna Merah, lalu Kuning dan terakhir Lingkaran Hijau akan muncul yang menandakan bahwa proses flashing telah selesai


II. Flashing dengan CWM
A. ROM Baru:
---------------------------------------------------------------------------------------------------
HH anda harus sudah di-flash dengan custom Recovery (CWM) untuk bisa masuk ke menu di bawah ini.

Cara ber-Navigasi di CWM:
UP – tombol “Vol +”
DOWN – tombol “Vol -”
Confirm – tombol “Power”
---------------------------------------------------------------------------------------------------
1. Matikan HH
2. Sambungkan HH ke PC via USB
3. Tekan tombol “Vol +” dan “POWER” secara bersamaan dan tahan keduanya sampai masuk ke menu berikut ini (Sebagai alternatif pilihannya, gunakan aplikasi Mobile Uncle - lalu masuk ke Recovery):

4. Pilih Wipe data/factory reset
 

 5. Confirm, pilih Yes, Confirm, lalu Go Back



6. Pilih Wipe cache partition

 

7. Confirm, pilih Yes, Confirm, lalu Go Back



8. Pilih Advanced



9. Confirm, pilih Wipe Dalvik Cache, Confirm, lalu Go Back



10. Pilih Install zip from sdcard, lalu Confirm



11. Choose zip from sdcard, Confirm, lalu pilih nama file target ZIP, Confirm


12. Pilih Yes, Confirm (sample)

  


B. Patches, Fixes etc.:
---------------------------------------------------------------------------------------------------
HH anda harus sudah di-flash dengan custom Recovery (CWM) untuk bisa masuk ke menu di bawah ini.

Cara ber-Navigasi di CWM:
UP – tombol “Vol +”
DOWN – tombol “Vol -”
Confirm – tombol “Power”
---------------------------------------------------------------------------------------------------
1. Matikan HH
2. Sambungkan HH ke PC via USB
3. Tekan tombol “Vol +” dan “POWER” secara bersamaan dan tahan keduanya sampai masuk ke menu berikut ini (Sebagai alternatif pilihannya, gunakan aplikasi Mobile Uncle - lalu masuk ke Recovery):



4. Pilih Install zip from sdcard, lalu Confirm



5. Choose zip from sdcard, Confirm, lalu pilih nama file target ZIP, Confirm

 

6. Pilih Yes, Confirm (sample)

I. CWM BACKUP & RESTORE
 ---------------------------------------------------------------------------------------------------
NOTE 1: HH anda harus sudah di-flash dengan custom Recovery (CWM) untuk bisa masuk ke menu di bawah ini.

NOTE 2: External SD card must be installed and have enough free space (1GB+)

NOTE 3: For restore must use exact same external SD card that was used for backup

Cara ber-Navigasi di CWM:
UP – tombol “Vol +”
DOWN – tombol “Vol -”
Confirm – tombol “Power”
---------------------------------------------------------------------------------------------------
A. BACKUP
1. Matikan HH
2. Sambungkan HH ke PC via USB
3. Tekan tombol “Vol +” dan “POWER” secara bersamaan dan tahan keduanya sampai masuk ke menu berikut ini (Sebagai alternatif pilihannya, gunakan aplikasi Mobile Uncle - lalu masuk ke Recovery):



4. Pilih Backup and recovery
 

5. Pilih Backup
 

6. Go back, Reboot system now.


B. RESTORE
1. Matikan HH
2. Sambungkan HH ke PC via USB
3. Tekan tombol “Vol +” dan “POWER” secara bersamaan dan tahan keduanya sampai masuk ke menu berikut ini (Sebagai alternatif pilihannya, gunakan aplikasi Mobile Uncle - lalu masuk ke Recovery):

4. Pilih Backup and recovery


5. Pilih Restore


6. Choose desired backup to restore as per date/time, Confirm


7. Wait until Restore process complete & Reboot device.

In most cases (but not always) MTK65XX devices can be recovered from complete malfunction when device doesn't respond on any buttons combinations, can not be powered ON, doesn't recognized by PC - this condition sometimes called "BRICK".

NOTE: Do not mix "BRICK" condition with Boot Loop or screen flickering or black out etc. these conditions are mostly related to System or Boot partitions and can be fixed with flashing Stock ROM via SP flash tool (C.I.A). Typical "BRICK" condition identified when PC doesn't recognize device.

In order to recover "BRICK" have to use Test Point.

Test Point (TP) is the point on the Phone Circuit Board (PCB) which is granting access to the internal loader integrated into the chip. Activating internal loader you can flash Preloader partition (using SP Flash Tool) which is part of the original phone firmware.

Before phone disassembling and searching for TP try option:
Press and hold Camera, Vol Down, Vol Up, Power and all the possible buttons combinations, even all buttons at the same time and then connect the cable to the PC.

If “Buttons hold” method doesn't work and PC still can't recognize device proceed with TP identification.

1. Make sure DA VCOM drivers are installed (A.1, B.1)

2. Make sure your PC audio is working loud enough (to identify if device is recognized)

3. Download Stock ROM (firmware) applicable to your device. Must be SP Flash Tool version.

4. Run SP Flash Tool – Load Scatter File – Put checks only on PRELOADER & DSP_BL (if available) – Press F9 or Download
 

5. Prepare wire “jumper”
 

NOTE: For safety reason it is better to use a Resistor from 100-1000 Ohm soldered between “jumper” ends, otherwise there is chance to burn PCB components

6. Disassemble phone until get access to PCB

7. Take a look for a small circular (sometimes square) areas 1-2mm in a diameter. They are clear and sometimes (but not always) has marking like Rx,Tx,GND,Vcc,Vcharge etc. If point has marking like KCOLO, COLO, KOLO or CO most probably you got TP at once. (Do not use Vcc, Vcharge or any points which have 4+ volts)

NOTE: Sometimes TP can be covered by lacquer or thin protective film, Identification sticker under battery or even PCB bus cable. so in order to get access have carefully remove them, just enough to touch by wire "jumper".

8. Short suspected TP to the phone Ground using wire “jumper”. Ground point can be identified as GND marking, also can use PCB Battery Negative pin (Battery “-“) or even screw holes.

9. Connect phone to PC via USB cable

NOTE: Connecting USB cable you will apply electrical power to your PCB so make sure you are not shorting other parts of PCB


10. If you short correct point PC will sound new device connection and SP Flash Tool will start Loading PRELOADER and DSP_BL (if available).

NOTE: You have to hold wire “jumper” shorted until flashing is complete.

11. If PC doesn’t recognize device and no action in SP Flash Tool, repeat steps 7-9 with another point.

12. After successful PRELOADER & DSP_BL partitions loading you can flash device with all partitions as usual without wire “jumper” (C.I.A)
.